7. Remove the fan from the frame by removing the three M2.5 x 5-mm screws.
8. Lift the fan out of the computer.
Replacing a System Fan
NOTE:
If the system board was replaced, be sure to reattach the microphone cable under the left fan before replacing
the fan.
1
microphone cable
1. Attach the left fan to the computer frame using three M2.5 x 5-mm screws.
2. Route the left fan cable under the notch on the frame.
3. Connect the left fan cable to the system board connector (JFAN1).
2
microphone cable connector
3
system board connector