Dell XPS M2010 Service Manual page 66

1 system board
16. Remove the six M2.5 x 8-mm screws that attach the left and right hinge arms to the computer base.
1 system board
17. Lift the computer base and carefully thread the solenoid and video cables through the opening in the bottom of the
computer base. These cables are attached to the right hinge arm.
18. Remove the hinge arms and display from the computer base and set the display aside.
2 solenoid cable
2 M2.5 x 8-mm screws (6)
3 solenoid card
3 hinge arms (2)