Dell XPS M2010 Service Manual page 70

1. Insert the system board, slowly easing the connectors into their access holes on the back and side of the computer
base.
Ensure that the cables for the microphone and keyboard are not underneath the system board.
2. Replace the four M2.5 x 5-mm screws marked with white arrows on the system board.
3. Replace the USB/audio port board:
a. Insert the USB/audio port board at an angle and push down on the black connector to snap the board into place.
b. Attach the USB/audio port board to the system board with four M2.5 x 5-mm screws.
c. Connect the USB/audio cable to the connector on system board (JAUDIO).
4. Connect the cable for the internal card with Bluetooth wireless technology to the connector on the system board (JBT).
5. Connect the subwoofer cable to the connector on the system board (JWOFR).
6. Connect the keyboard cable to the connector on the system board (JKBDK). Place the flat cable in the connector, then
close the connector.
7. Connect the microphone cable to the connector on the system board (JMIC).
8. Replace the modem (see
9. Thread the solenoid and video cables through the opening in the computer base.
10. Seat the computer base onto the hinge arms, aligning the screw holes in the computer base with those in the hinge
arms.
11. Connect the solenoid cable to the solenoid card.
12. Replace the frame (see
13. Replace the processor thermal-cooling assembly (see
14. Replace the video card/thermal-cooling assembly and connect the video cable to the video card (see
Video Card/Thermal-Cooling
15. Replace the system fans (see
16. Replace the hard drive(s) (see
17. Replace the top cover (see
18. Replace the cosmetic covers (see
NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the
computer.
19. Firmly attach the keyboard to the computer and close the display (see
20. Turn the computer upside down.
21. Replace the coin cell battery (see
22. Connect the cables to the system board connectors for the speaker (JSPK), suspend and solenoid function (JHING), and
infrared (JCIR).
23. Replace the mini card antenna cables and card (see
24. Replace the memory module(s) and cover (see
25. Replace the system battery (see
Replacing the Modem).
Replacing the Frame).
Assembly).
Replacing a System
Replacing a Hard
Replacing the Top Cover).
Replacing the Cosmetic
Replacing the Coin-Cell
Replacing the Memory
Replacing the System
Replacing the Processor Thermal-Cooling
Fan).
Drive).
Covers).
Closing the
Battery).
Replacing a Mini Card).
Module).
Battery).
Assembly).
Replacing the
Display).