Dell XPS M2010 Service Manual page 29

1 system board
13. Remove the six M2.5 x 8-mm screws that attach the left and right hinge arms to the computer base.
1 system board
14. Tilt the display forward slightly so the display does not tip over backwards when you remove the computer base.
15. Lift the computer base and carefully thread the solenoid and video cables through the opening in the bottom of the
computer base. These cables are attached to the right hinge arm.
2 solenoid cable
2 M2.5 x 8-mm screws (6)
3 solenoid card
3 hinge arms