Dell XPS M2010 Service Manual page 52

1 video card/thermal-cooling
assembly
NOTE: The video card is integrated with its thermal assembly. Do not remove the heatsink from the video card.
9. Pull the video card/thermal-cooling assembly straight up to disconnect the card from the system board.
Replacing the Video Card/Thermal-Cooling Assembly
1. Align the video card/thermal-cooling assembly over the connector and screw holes on the system board.
2. Press down on the "PUSH HERE" label on the video card/thermal-cooling assembly.
3. Tighten in consecutive order the four captive screws, labeled "1" through "4", on the video card/thermal-cooling
assembly.
4. Connect the video cable to the connector on the video card.
5. Replace the right hard drive (see
6. Replace the top cover (see
7. Replace the cosmetic covers (see
NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the
computer.
8. Firmly attach the keyboard to the computer and close the display (see
9. Turn the computer upside down and replace the system battery (see
2 captive screws
(4)
Replacing a Hard Drive).
Replacing the Top Cover).
Replacing the Cosmetic
3 system board connector
(JVGA)
Covers).
Closing the
Replacing the System
Display).
Battery).