Removing The Memory Module Cover; Memory Module - Dell XPS M2010 Service Manual

Hide thumbs Also See for XPS M2010:

Table of Contents

Back to Contents Page

Dell™ XPS™ M2010 Service Manual

Removing the Memory Module Cover

Removing the Memory Module

Replacing the Memory Module

CAUTION:

Before you begin the following procedure, follow the safety instructions in the Product

Information Guide.

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your body

before you touch any of your computer's electronic components. You can do so by touching an unpainted metal

surface. If you leave the area, ground yourself again when you return to the computer.

NOTE:

Memory modules purchased from Dell are covered under your computer warranty.

NOTE:

To get maximum performance/dual-channel memory bandwidth capability, both memory module connectors

must contain memory modules and the modules must be of the same size and configuration.

The computer has two memory slots, DIMM A and DIMM B, located under the memory module cover. If you replace or

upgrade the memory in your computer, both memory modules must be the same size.

Removing the Memory Module Cover

NOTICE:

To help prevent damage to the system board, you must remove the main battery before you begin working

inside the computer.

1. Follow the instructions in

2. With the computer still turned over, loosen the captive screw on the memory module cover and slide the cover toward

the back of the computer to remove it.

memory module cover

Before Working Inside Your

Computer, including removing the system battery.

captive screw

Table of Contents