Dell XPS M2010 Service Manual page 71

Hide thumbs Also See for XPS M2010:

Table of Contents

26. Turn the computer over and open the display (see

27. Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base.

NOTICE:

Before turning on the computer, ensure that no stray screws remain inside the computer. Failure to do so

may result in damage to the computer.

28. Turn on the computer.

NOTE:

If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD so that you can

set up the computer to boot from a CD this one time only. Otherwise, you must enter the system setup program to

change the default boot order.

29. Insert the flash BIOS update program CD that accompanied the replacement system board assembly into the optical

drive. Follow the instructions that appear on the screen. See

NOTE:

The Service Tag is located in the battery compartment.

To update the BIOS on the new system board with the computer Service Tag, press <F2> during POST to enter the

system setup program. See

Back to Contents Page

Opening the

Flashing the

BIOS.

Display).

Flashing the BIOS

for further information.

Table of Contents