Power Connector - HP Pavilion G6 Maintenance And Service Manual

Power connector

Description
Power connector
Before removing the power connector cable, remove the following components:
1. Battery (see
2. Service access cover (see
3. Hard drive (see
4. Optical drive (see
5. Keyboard (see
6. Top cover (see
Remove the power connector:
1. Position the computer right-side up.
2. Disconnect the power connector cable (1) from the system board.
3. Lift the power connector (2) away from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
Downloaded from LpManual.com Manuals
Battery on page 43)
Service access cover on page
Hard drive on page 45)
Optical drive on page
Keyboard on page 52)
Top cover on page 55)
44)
47)
Component replacement procedures
Spare part number
641137-001
63