Procedure For Tilting Up; Procedure For Tilting Down - Yamaha F6A Owner's Manual

EMU01312

PROCEDURE FOR TILTING UP

Power tilt model
1) Remove the fuel-line connection from
the motor.
2) Push the power tilt switch "UP" until the
outboard has tilted up completely.
3) Push the tilt support knob into the clamp
bracket to support the engine.
WARNING
@
After tilting the engine, be sure to sup-
port it with the tilt support knob. Other-
wise, the engine could fall back down
suddenly if oil in the power tilt unit
should lose pressure.
@
EMU01313

PROCEDURE FOR TILTING DOWN

Power tilt model
1) Push the power tilt switch "UP" until the
engine is supported by the tilt rod.
2) Pull out the tilt support knob.
3) Push the power tilt switch "DN" (Down)
to lower the engine to the desired posi-
tion.
3-53
GB