Installing The Replacement Psu - Extreme Networks Summit X150 Series Installation Manual

Maintenance Procedures for Summit X650 Series Switches
4 Disconnect the ground wire as follows:
a Remove the screw that secures the ground wire to the PSU.
b Move the wire away from the PSU.
5 Push the latching tab to the left as you pull outward on the handle to disengage the PSU internal
connectors (see
Figure 119: Removing a DC PSU

Installing the Replacement PSU

To install a replacement Summit X650 DC PSU:
1 Verify that the PSU is right side up (see
2 Carefully slide the PSU all the way into the power supply bay (see
the latch snaps into place.
CAUTION
Do not slam the PSU into the switch.
Figure 120: Installing a Summit X650 DC PSU
154
Figure 119).
SH_113
Figure 120)
SH_107
ExtremeXOS Summit Family Switches Hardware Installation Guide
Figure 120). Push the PSU in until