Extreme Networks Summit X150 Series Installation Manual page 102

Installing Summit Family Switches
3 From the back of the equipment rack, slide the switch into place over the mounting brackets (see
Figure 69). Make sure the brackets slide between the support pegs on both sides of the switch.
Figure 69: Sliding the Switch onto the Rear Mounting Brackets
4 Push the switch forward as far as it will go, until the bracket support pegs are against the T of the
mounting bracket
Securely tighten the rack mounting screws.
Figure 70: Fastening the Rear Mounting Brackets—Two-Post Rack
102
(Figure 70).
SH_082
SH_098
ExtremeXOS Summit Family Switches Hardware Installation Guide