Connecting A Stacking Cable To A Stacking Port - Extreme Networks Summit X150 Series Installation Manual

Figure 60: SummitStack Cable Connections Using Four Summit Switches
BD_164A

Connecting a Stacking Cable to a Stacking Port

To connect a Summit stacking cable:
1 Align the cable connector with the stacking port connector on the back of the first switch (Figure 61).
2 Firmly press the cable connector into place on the mating stacking port connector.
3 Align and tighten the retaining screws on the cable connector.
Repeat steps 1 through 3 to connect the cable to the second switch.
Figure 61: Connecting a Summit Stacking Cable
ES4K037
CAUTION
Avoid making sharp bends in the cable. Sharp bends can stress the cable and cause damage.
91
ExtremeXOS Summit Family Switches Hardware Installation Guide