Summit X350-24T Switch - Extreme Networks Summit X150 Series Installation Manual

Summit X350-24t Switch

The front panel of the Summit X350-24t switch
Twenty fixed autosensing 10/100/1000 BASE-T ports (ports 1–20) that provide 20 Gbps of
●
high-density copper connectivity
Four combination ports (ports 21-24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
●
or fiber connectivity
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Serial console port used to connect a terminal and perform local management.
●
Figure 23: Summit X350-24t Switch Front Panel
The rear panel of the Summit X350-24t switch
Slot for the one of the following Summit option cards:
●
Summit XGM2-2xf option card, which allows you to add one or two 10-Gigabit XFP modules
■
See "Summit XGM2-2xf Option Card" on page
Summit XGM2-2xn option card, which allows you to add one or two 10-Gigabit XFP modules
■
See "Summit XGM2-2xn Option Card" on page 145
Summit XGM2-2bt option card, which allows you to add one or two fixed 10GBASE-T ports
■
See "Summit XGM2-2bt Option Card" on page 147
Summit XGM2-2sf option card, which allows you to add one or two 10-Gigabit SFP+ modules
■
See "Summit XGM2-2sf Option Card" on page 147
Management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-500 External Power Module
●
(Model No. 10907).
See "EPS-500 External Power Supply Unit" on page 65
redundant power supply cable is shipped with the EPS-500 unit.
AC power input socket
●
The power supply operates from 100 VAC to 240 VAC.
ExtremeXOS Summit Family Switches Hardware Installation Guide
(Figure 23) includes:
Table 9.
10/100/1000 Mbps ports
Combination ports
(Figure 24) includes:
146.
for more information. The connecting
Console
port
SH_064
37