Product Overview; Controls - Toro 04520 Operator's Manual

Product Overview

4
2
3
1
g014674
1. Engine
2. Roll bar
3. Control panel
4. Seat

Controls

Traction Pedal
The traction pedal (Figure
machine move forward, to move it backward, and to stop the
machine. Press the top of the pedal to move forward and the
bottom of the pedal to move backward or to assist in stopping
when moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For operator comfort,
do not rest the heel of your foot on reverse when operating
forward (Figure 11).
5
6
7
Figure 9
5. Steering wheel
6. Traction pedal
7. Foot rest
8. Reels with grass baskets
10) has 3 functions: to make the
1
1. Traction pedal—forward
2. Taction pedal—reverse
8
Ground speeds are as follows:
•
3.2 to 8 km/h (2 to 5 mph) forward mowing speed
•
16 km/h (10 mph) maximum transport speed
•
4.0 km/h (2.5 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal
arm for operator comfort, then, release the pedal to lock the
arm in place.
Throttle Lever
The throttle lever
of the engine. Move the throttle lever toward the F
position to increases the engine speed; move it toward the
S position to decrease the engine speed.
LOW
Note: You cannot stop the engine cannot using the throttle
lever.
16
Figure 10
3. Steering-arm-locking
pedal
Figure 11
(Figure 10) and raise or lower the steering
(Figure 12) allows you to control the speed
2
3
g014603
AST