Taking Pictures Using The Remote Control Unit (Optional) - Pentax Optio VS20 Operating Manual

Hide thumbs Also See for Optio VS20:
Table of Contents

Advertisement

4
Press the shutter release button fully.
In j or A, C mode, pictures are taken continuously as long as you
keep the shutter release button pressed.
In I mode, 16 pictures are taken continuously with one press of the
shutter release button.
• The flash does not discharge in j, A
• j, A
C (Natural Skin Tone), A (Night Scene), N (Frame Composite) or
F (Digital Panorama) and movie recording modes. I cannot be
selected in c (Digital SR) mode.
• The focus and exposure are locked with the first shot.
• When the Face Detection is activated (p.69), it works only when taking
the first shot.
• In I mode, pictures are taken with the following settings.
- Sensitivity is fixed at AUTO.
- EV Compensation and Auto Focus are adjusted when taking the first
picture and are fixed for subsequent pictures.
- The flash is not available (a appears).
- The last shot taken is displayed in Instant Review.
• In I mode, the recorded pixels is fixed at m (640×480) per one
frame and will be saved as a single image in 4 × 4 rows of the 16
images with the recorded pixels of f (2560×1920).
• When you play back the images taken with I mode, they will be
displayed as follows.
- When played back on this camera, 16 images are continuously
played back like a movie. You can save one of a series of images
taken with I mode as a single image. The available operations
during playback are the same as when playing back the movies.
(p.133)
- When played back on a computer, the16 images are arranged in 4
× 4 rows and displayed as a single image.
Taking Pictures Using the Remote Control Unit
(Optional)
You can use the remote control (optional) to take pictures while you are
away from the camera.
Remote
i
Control
Downloaded From camera-usermanual.com
,
C and I cannot be selected in 9 (Green), b (Auto Picture),
The shutter will be released after about three seconds when
the shutter release button on the remote control unit is pressed.
,
C or I mode.
3
93

Advertisement

Table of Contents
loading

Table of Contents