Taking Pictures Using The Remote Control Unit (Optional) - Pentax Optio W90 Operating Manual

Taking Pictures Using the Remote Control Unit
(Optional)
You can use the remote control (optional) to take pictures while you are
away from the camera.
3-sec Remote
i
Control
0-sec Remote
h
Control
3
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press
the four-way controller (3).
3
Use the four-way controller
(45) to select i or h and
press the 4 button.
The self-timer lamp begins to blink
slowly and be ready to take a picture
by the remote control.
When the camera detects a person's
face, the Face Detection function is activated and the face detection
frame appears (p.81).
106
The shutter will be released after about three seconds when
the shutter release button on the remote control unit is pressed.
The shutter will be released immediately when the shutter
release button on the remote control unit is pressed.
Shutter release
button
Four-way controller
4 button
Drive Mode Drive Mode Drive Mode
Remote Control Remote Control Remote Control
MENU MENU MENU Cancel Cancel Cancel OK OK OK OK OK OK