Taking Pictures Using The Remote Control Unit (Optional) - Pentax Optio Optio WG-1 Operating Manual

• With j, you can continue shooting until the memory capacity of the
SD Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and
[Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.80), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f/
the shooting mode is set to
pixels is set to V (1280×960).
3
Taking Pictures Using the Remote Control Unit
(Optional)
You can use the remote control (optional) to take pictures while you are
away from the camera.
3-sec Remote
i
Control
0-sec Remote
h
Control
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press
the four-way controller (3).
106
The shutter will be released after about three seconds when
the shutter release button on the remote control unit is pressed.
The shutter will be released immediately when the shutter
release button on the remote control unit is pressed.
(Report), the number of recorded
Shutter release
button
Four-way controller
4 button
in c mode. When