Taking Pictures In The Basic Mode (Green Mode) - Pentax Optio VS20 Operating Manual

2
Use the four-way controller (2345) to select R.
3
Press the 4 button.
R (Program) mode is selected and the
camera returns to capture status.
When the camera detects a face, the Face
Detection function is activated and the face
detection frame appears (p.69).
4
Set the functions you want to change.
3
Refer to "Setting the Shooting Functions" (p.97) for details on how to
set the functions.
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.

Taking Pictures in the Basic Mode (Green Mode)

In 9 (Green) mode, you can enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec.Mode] menu.
9 mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display Normal
Recorded Pixels
White Balance
Focusing Area
Focus Assist
Sensitivity
AUTO ISO Range
EV Compensation
Highlight Correction
Downloaded From camera-usermanual.com
72
, (Auto)
9 (Standard)
= (Standard)
m (4608×3456)
F (Auto)
J (Multiple)
O (On)
AUTO
ISO100-800
±0.0
P (Off)
Shadow Correction P (Off)
Shake Reduction
Face Recall
Face Detection
Blink Detection
Digital Zoom
Sharpness
Saturation
Contrast
Date Imprint
Electronic Level
38 38
02/02/2012 02/02/2012
14:25 14:25 14:25
O (On)
Functional
O (On)
O (On)
O (On)
G (Normal)
G (Normal)
G (Normal)
Off
O (On)