Setting The Image Contrast (Contrast); Setting The Shake Reduction Function - Pentax Optio VS20 Operating Manual

Setting the Image Contrast (Contrast)

You can set the image contrast level.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Contrast].
3
Use the four-way controller (45)
to change the contrast level.
3
F Low
G Normal
H High
4
Press the 3 button.
The camera returns to capture status.

Setting the Shake Reduction Function

You can set this function to correct camera shake which can occur
during shooting. The default setting is
Use the Movie SR function (p.125) to correct camera shake in movie
recording mode.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Shake
Reduction].
Downloaded From camera-usermanual.com
112
Rec. Mode
Memory
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Exit
MENU
O
(On).
3/4
Off