Installing The Battery - Pentax Optio VS20 Operating Manual

Hide thumbs Also See for Optio VS20:
Table of Contents

Advertisement

• Do not use the supplied battery charger (D-BC122) to charge batteries
other than the rechargeable lithium-ion battery D-LI122, as the battery
charger may overheat or be damaged.
• The battery has reached the end of its service life when it starts to run
1
down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace it with a new battery.
The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).

Installing the Battery

Use the rechargeable lithium-ion battery D-LI122 that is provided with
the camera. Charge the battery before using it in the camera for the first
time.
Battery lock lever
1
Open the battery/card cover.
Slide the battery/card cover lock lever in the direction indicated by the
arrow 1 and flip the cover open 2.
Downloaded From camera-usermanual.com
32
Battery/card
cover lock lever
Battery/
card cover
Battery

Advertisement

Table of Contents
loading

Table of Contents