Taking A Series Of Pictures (Continuous Shooting/Burst Shooting/16-Frame Shooting Mode) - Pentax Optio VS20 Operating Manual

Hide thumbs Also See for Optio VS20:
Table of Contents

Advertisement

Taking a Series of Pictures (Continuous Shooting/
Burst Shooting/16-frame Shooting Mode)
In these modes, pictures are taken continuously as long as the shutter
release button is pressed.
Continuous
j
Shooting
Burst
A
Shooting (L) The number of recorded pixels is fixed at f (2592×1944) and
3
Burst
C
Shooting (H)
16-frame
I
Shooting
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller
(453) to select j, A, C or I
and press the 4 button.
The camera is ready to take a series of
pictures.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
Downloaded From camera-usermanual.com
92
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality, the
longer the interval between shots.
pictures are taken consecutively. The interval between shots
becomes shorter in the following sequence: A and C.
16 pictures are taken continuously at 1/7.5 second intervals.
Shutter release button
Four-way controller
4 button
Shutter release button
for vertical shooting
Drive Mode
Drive Mode
Drive Mode
Continuous Shooting
Continuous Shooting
Continuous Shooting
Cancel
MENU
OK
OK

Advertisement

Table of Contents
loading

Table of Contents