Multi-Image Display - Pentax Optio VS20 Operating Manual

Hide thumbs Also See for Optio VS20:
Table of Contents

Advertisement

Green button
3
Press the four-way controller (3).
Playback stops.

Multi-Image Display

4
Four-Image Display/Nine-Image Display
You can display four or nine thumbnails of captured images at a time.
1
In Q mode, turn the zoom lever to the left (f).
The four-image display appears showing a
page consisting of four thumbnail images.
Turn the zoom lever to the left (f) again to
switch to nine-image display.
A page consisting of four or nine thumbnail
images appears. The displayed images
change four or nine images at a time page
by page.
Use the four-way controller (2345) to
move the frame. If there are too many
images to display on one page, pressing the
four-way controller (24) while the image
1 is selected will display the previous
page. Similarly, if you choose image 2 and
press the four-way controller (35), the
next page appears.
Downloaded From camera-usermanual.com
134
Saves the paused frame of a series of images
taken with I (16-frame shooting) mode as a
single image in m (640×480) pixels.
Zoom lever
Q button
Four-way controller
4 button
3 button
Frame
1
2
Select & Delete
100-0010
Nine-image display

Advertisement

Table of Contents
loading

Table of Contents