Rotating The Image - Pentax Optio VS20 Operating Manual

Hide thumbs Also See for Optio VS20:
Table of Contents

Advertisement

• The slideshow will continue until you press any button other than the
4 button.
• Movies will normally be played through to the end before the next
picture is played back, regardless of the interval setting. However,
pressing the four-way controller (5) while playing back a movie skips
to the next image.
• Panorama images will be scrolled for display from left to right in 4
seconds before the next picture is played back, regardless of the
settings of [Interval] or [Screen Effect].
Connecting the Camera to AV Equipment 1p.149

Rotating the Image

4
1
Press the Q button after taking a picture.
The image appears on the display.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select s
(Image Rotation) and press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the rotation
direction and press the 4
button.
The rotated image is saved.
• Movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated
state.
Downloaded From camera-usermanual.com
140
Cancel
Cancel
Cancel
MENU
OK
OK
OK
OK

Advertisement

Table of Contents
loading

Table of Contents