Tuning Into Stations; Manual Tuning; Auto Browse; Direct Keypad Entry - Tecsun PL-880 Operation Manual

TUNING INTO STATIONS

Turn on the radio, then select your desired band by pressing on
either the FM, AM or SW buttons.
Now, you can tune into your favorite stations using any of the
following tuning methods:

MANUAL TUNING

In View Frequency (VF) mode, rotate the [TUNING] knob to
search for your desired stations.

AUTO BROWSE

In VF mode, press & hold the [VF/VM]
button. The " >> " symbol advances
from left to right and the device will
automatically browse the available
stations, staying on each station for
about 5 seconds.
To stop the auto browse function, simply rotate the [TUNING]
knob or press the [VF/VM] button to confirm your desired
station.
Note:
While operating the "AUTO BROWSE" function, you can press
the [MEMORY] button anytime to store the station into memory,
the radio will keep on browsing to the next available station.

DIRECT KEYPAD ENTRY

In "VF" mode, you can press the numeric keys [ 0 - 9 ] to directly
enter a station frequency.
Note:
1. For FM band, ignore the decimal point when inputting
frequency numbers. For example: enter 8, 9, 3 for FM 89.3
MHz.
2. If the entered frequency is not within the covering range, the
error "Err" symbol will be displayed.
9
flashing
Auto browse station
PL-880