Changing The Default Setting - IBM ThinkPad 760E Instruction Manual

Installing Windows NT Workstation Software

Changing the Default Setting

224
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
The required esfm.dll driver is already on the system.
Do you want to use the current drive or install a new driver?
5
Click on New.
6
Select the ESS Base I/ O address, DMA channel, and interrupt
level from the list of values.
Default Settings
Select the default setting for most applications:
I/ O address
Interrupt
DMA channel
Since the ThinkPad 760EL does not support connecting to
an external MIDI device, select the following value in the
next field:
MPU401 I/ O Address
7
Select OK.
8
When the installation program prompts you, restart Windows NT
to make the change effective.
If you need to change the default setting of ESS audio resources
such as an interrupt level, DMA channel, or I/ O base address, make
sure that the selected values match with the ones set by the
ThinkPad Features program. ThinkPad Feature program allows you
to set the following alternative value for each resources:
Base I/ O Address 220 or 240 ( 2 20 is a default value)
Interrupt 5, 7, or 10 ( 5 is a default value)
DMA channel 1 or 0 ( 1 is a default value)
To change the default setting, do the following:
1
Start the ThinkPad Feature program, and change the default
settings.
2
Shut down and restart Windows NT.
3
Open the Windows NT Control Panel and click on Drivers.
220
5
1
Disable