Using The Modem With Dos; Using The Modem With Windows; Using Country Selection - IBM ThinkPad 760E Instruction Manual

Using the Mwave Telephony Function

Using the Modem with DOS

Using the Modem with Windows

WIN
WIN
WIN

Using Country Selection

58
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To start the Mwave modem with DOS, do the following:
DOS
1
Type FASTCFG at the DOS prompt; then press Enter.
The FASTCFG utility opens.
2
Select Advanced Modem; then select OK.
3
Start your communication program.
When you start Windows, the Mwave modem automatically starts
and will be ready to use.
Important
Each country has restrictions on communication that uses
telephone lines. Use this window whenever you travel to other
countries.
The Country Selection window allows you to change the country
name currently supported by the Mwave telephony features. When
you travel to other countries and use the Mwave telephony function,
you need to select the country name from the list of countries in this
window.