Installing The Enhanced Video/ M Peg Device Driver For Os/ 2 - IBM ThinkPad 760E Instruction Manual

Installing the Enhanced Video/ M PEG Device Driver for OS/ 2

760
E V
i d eo
nh
Installing the MMPM/ 2 MPEG Update Diskette
To install the ThinkPad display device driver:
1
Start OS/ 2 Warp.
2
Insert the Video Features Diskette for OS/ 2 into the diskette
drive and open the OS/ 2 full screen or OS/ 2 window.
3
Go to the A: prompt; then type INSTALL and press Enter.
Follow the instructions on the screen.
4
After the installation is complete, remove the diskette, shut
down OS/ 2 , and restart the computer.
This section is for computers with the Enhanced Video/ M PEG
features installed.
Important
To use the Video Overlay/ C apture and MPEG functions, make
sure you have installed the following software before installing
the Video Overlay/ C apture and MPEG device drivers:
ThinkPad Display Driver ( 9 385) for OS/ 2 Warp
Mwave DSP support software
Video IN from the OS/ 2 BonusPak preloaded on the
computer
Important
This procedure is necessary only for OS/ 2 Warp Version 3 and
3.01. For versions of OS/ 2 Warp later than that, skip this
section.
Installing OS/ 2 Software
Chapter 7. Installing Software
183