Setting Up Your Computer; Connecting To A Power Source - IBM ThinkPad X20 Install Manual

Setting up your computer

Connecting to a power source

1. Insert the battery pack into the battery compartment located
at the rear of the computer:
1. Switch the battery lock 1 to the unlocked
position.
2. Insert the battery pack into the battery compartment. 2
Note: Depending on the battery option you ordered,
your battery may appear different from the figure.
3. Switch the battery lock 1 to the locked
position.
2. Connect the ac adapter to the computer's power jack (at the
rear of the computer) in the order shown.
2
2
2
1
3
2
1