Installing the Infrared Device Driver for OS/ 2
The infrared device driver for OS/ 2 Warp is included in the
application TranXit for OS/ 2 .
If you have an infrared application such as TranXit version 1.0 for
Windows that runs in WIN-OS/ 2 , install the WIN-OS/ 2 infrared
device driver:
1
Start OS/ 2 Warp.
2
If you have not installed DOS and WIN-OS/ 2 support for OS/ 2 ,
install it by referring to your operating system documents.
3
Go to the DOS command prompt and insert the Infrared
Features Diskette into the diskette drive.
4
Type A:UINSTALL and press Enter.
The following screen appears:
Type the SOURCE drive letter (A-Z). When you install a program, the
SOURCE drive letter is the location you are installing FROM.
Source Drive ...
Enter F1=Help F3=Exit
5
Press Enter; then follow the instructions on the screen.
Select Install Win-OS2 ThinkPad InfraRed Driver when you
are asked.
Installing OS/ 2 Software
Installation Options
Installation Source Drive
Chapter 7. Installing Software
181