Installing The Thinkpad Features Program For Windows 3.11 - IBM ThinkPad 760E Instruction Manual

Installing Windows 3.11 Software

Installing the ThinkPad Features Program for Windows 3.11

Note:
When installing an operating system,
you need to install the ThinkPad
Features program.
Installing the PC Card Director for Windows 3.11
Note:
The PC Card Director for Windows
3.11 must be installed with Windows
3.11 or a later version with enhanced
mode. Otherwise, it cannot be
installed.
To use PC Card Director:
Page 44.
194
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
If you are going to use Windows, install the ThinkPad Features
program for DOS first (see page 187); then do the following to install
the ThinkPad Features program for Windows 3.11:
1
Start Windows.
2
Select File from the Program Manager window; then select
Run... from the pull-down menu.
3
Insert the Utility Diskette for Windows into the diskette drive;
then type A:\INSTALLW and press Enter.
4
Follow the instructions on the screen.
Default choices are already highlighted at the Installation
Options screen.
When installing Windows 3.11, you need to install the PC Card
Director. You must install the following device drivers and software
associated with PCMCIA before you can use the PC Cards:
Card Services device driver
Socket Services device driver
Resource Map Utility device driver
PC Card Power Management device driver
PC Card Director Utility
PC Card client device drivers (only when PC Card Director does
not support the PC Card)
To install the PC Card Director:
1
Start Windows.
2
Select File from the Program Manager window; then select
Run... from the pull-down menu.
3
Insert the PC Card Director Diskette for DOS and Windows into
the diskette drive; then type A:PCMINSTW and press Enter.