Table of Contents
Advertisement
Maintenance
Determine the left and right sides of the machine from the
normal operating position.
CAUTION
Only qualified and authorized personnel shall be
permitted to maintain, repair, adjust, or inspect the
vehicle.
Avoid fire hazards and have fire protection
equipment present in the work area. Do not use an
open flame to check level or leakage of fuel, battery
electrolyte, or coolant. Do not use open pans of fuel
or flammable cleaning fluids for cleaning parts.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
After the first 8 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 100 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Check condition and tension of the alternator belt.
• Torque the front and rear wheel nuts.
• Check the adjustment of the shift cables.
• Check the adjustment of the parking brake.
• Replace the hydraulic filter.
• Change the high flow hydraulic oil filter (TC models only).
• Inspect opening on filter.
• Change the engine oil and filter.
• Check engine oil level.
• Check the level of coolant.
• Check the transaxle/hydraulic fluid level.
• Check the high flow hydraulic fluid level (TC models only).
• Check the tire pressure.
• Check the brake fluid level.
• Check the operation of the interlock system.
• Remove debris from the engine area and radiator. (Clean more frequently in dirty
conditions.)
• Check the battery fluid level. (Every 30 days if in storage)
• Check the battery cable connections.
• Check the level of front differential oil (four wheel drive models only).
• Grease all bearings and bushings (lubricate more frequently in heavy duty
applications).
• Check the condition of the tires.
CAUTION
If you leave the key in the ignition switch, someone
could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any
maintenance.
30
Advertisement
Table of Contents
