Operating Your Programmed Remote Controller; Dvd Mode (Dvd Player Mode); Sat Mode (Satellite Tuner Mode); Cable Mode (Cable Mode) - Onkyo TX-NR900E Instruction Manual

Operating your programmed remote controller

After entering a pre-programming by following the procedure
given above, the following modes become enabled for use.
ON
ENTER,
CH
ON
CH
72
Operations are the same as explained on page 67.
1. Press the SAT/MD MODE button.
STANDBY
2. Press the desired operation button.
SAT/MD MODE
The buttons given below have operations programmed
into them.
ON: Turns on and off satellite tuner unit (same as STANDBY
VOL
button on the remote controller)
CH
MENU
MUTING
ENTER: Confirms selection
MENU: Displays menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
MUTING: Activates the muting function at the TX-NR900/900E
Numeric keys
ENTER
1. Press the CABLE MODE button.
STANDBY
2. Press the desired operation button.
CABLE MODE
The buttons given below have operations programmed
into them.
ON: Turns on and off cable TV unit (same as STANDBY button on
VOL
the remote controller)
CH
MUTING
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
MUTING: Activates the muting function at the TX-NR900/900E
Numeric keys
ENTER

DVD MODE (DVD Player Mode)

SAT MODE (Satellite Tuner Mode)

The SAT/MD MODE button lights.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
: Changes selected preset channel
: Moves cursor
: Adjusts the volume at the TX-NR900/900E

CABLE MODE (Cable Mode)

The CABLE button lights.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
: Changes selected preset channel
: Adjusts the volume at the TX-NR900/900E