Operating Your Programmed Remote Controller; Dvd Mode (Dvd Player Mode); Sat Mode (Satellite Tuner Mode); Cable Mode (Cable Mode) - Onkyo TX-SR601E Instruction Manual

Operating your programmed remote controller

After entering a pre-programming by following the procedure
given above, the following modes become enabled for use.
ON
ENTER,
CH
ON
CH

DVD MODE (DVD Player Mode)

Operations are the same as explained on page 64.

SAT MODE (Satellite Tuner Mode)

1. Press the SAT/MD MODE button.
The SAT/MD MODE button lights.
2. Press the desired operation button.
STANDBY
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
SAT/MD MODE
The buttons given below have operations programmed
into them.
ON: Turns on and off satellite tuner unit (same as STANDBY
button on the remote controller)
VOL
CH
MENU
MUTING
ENTER: Confirms selection
MENU: Displays menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL
MUTING: Activates the muting function at the TX-SR701/701E/
Numeric keys
601/601E
ENTER

CABLE MODE (Cable Mode)

1. Press the CABLE MODE button.
The CABLE MODE button lights.
2. Press the desired operation button.
STANDBY
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed
CABLE MODE
into them.
ON: Turns on and off cable TV unit (same as STANDBY button on
VOL
the remote controller)
CH
0,1 to 9: Numeric keys
MUTING
ENTER: Confirm
You may also use the following buttons:
VOL
MUTING: Activates the muting function at the TX-SR701/701E/
601/601E
Numeric keys
ENTER
: Changes selected preset channel
: Moves cursor
: Adjusts the volume at the TX-SR701/701E/601/601E
: Changes selected preset channel
: Adjusts the volume at the TX-SR701/701E/601/601E
69