Navigating Through The Setup Menu - Onkyo TX-NR900E Instruction Manual

Setup Menu
OSD
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
|ENTER|Quit:|SETUP|
Front panel
display
Main menu

Navigating through the Setup Menu

You can change settings in the Setup Menu using the buttons on the
front panel and on the remote controller.
The buttons on the remote controller correspond to those on the TX-
NR900/900E as shown below.
Button on remote controller
SETUP
(upper edge of
ENTER button)
(lower edge of
ENTER button)
(left edge of
ENTER button)
(right edge of
ENTER button)
ENTER
RETURN
1.Speaker Setup
1.Speaker Config
→Basic Menu
2.Speaker Distance
3.Level Calibration
|ENTER|Quit:|SETUP|
Button on TX-NR900/900E
SETUP
SETUP
UP
DOWN
LEFT
RIGHT
ENTER
ENTER
RETURN
RETURN
1-1.Speaker Config
Menu
1. Press the SETUP button.
The main menu (Advanced Menu or Basic Menu) appears on
your television monitor.
2. Using the and
that you want to enter.
3. Press the ENTER button to enter the selected menu.
The screen for that menu appears.
4. Use the and
menu that you want to enter and press the ENTER
button.
Each sub-menu has different settings that can be changed as
desired, and they are all explained in the pages that follow. To
change a setting, first select it using the
and then change the setting using the
5. Press the RETURN button to set the new settings and
return to the previous menu screen.
Press the RETURN button again to return to the main menu.
Note:
Press the SETUP button to exit the Setup Menu immediately.
a.Subwoofer :Yes
b.Front L/R :Small
c.Center :Small
d.Surr L/R :Small
e.Surr Back :Small
f.Crossover:80Hz(THX)
Quit:|SETUP|
Sub-menu
cursor buttons, select the menu
cursor buttons to select the sub-
and cursor buttons,
and cursor buttons.
45