Video Setup Sub-Menu; Character Input Sub-Menu - Onkyo TX-NR900E Instruction Manual

Input Setup

2-3. Video Setup Sub-menu

Advanced Menu
2.Input Setup
Input:DVD
2-3.Video Setup
Input:DVD
a.Video
:DVD
b.Component Video
:INPUT1
Quit:|SETUP|
a. Video
This setting allows you to match the audio from one component with
the video from another. Therefore, you can set a video source to be
displayed while the audio from another input source is heard. For
example, this allows you to play the music from a compact disc,
while displaying the picture from a video cassette player or other
video source.
b. Component Video
If the video signal from a component is input to one of the
COMPONENT VIDEO input banks (1 or 2), then which input
source and which component video input bank must be set here.
The default settings are given below.
Input source selected Video
CD Last Valid
PHONO Last Valid
TUNER Last Valid
TAPE Last Valid
DVD DVD
VIDEO 1 VIDEO 1
VIDEO 2 VIDEO 2
VIDEO 3 VIDEO 3
VIDEO 4 VIDEO 4
VIDEO 5 VIDEO 5
NETWORK Last Valid
Last Valid: Select to have the video of the previous input source
continued. For example, if the selected input source is VIDEO 1,
and you then change to CD (set to "Last Valid"), then the audio
from the CD input is played while the video from VIDEO 1
continues.
This sub-menu allows you to give names to the stations you have
preset for the AM/FM tuner, and to the input sources you have
connected (excluding the tuner itself). Up to 10 characters can be
entered for each name. For example, if you have a DVD connected to
the VIDEO4 jack, then you can give it the name "DVD2." Or, if you
have multiple VCRs connected, you can enter the model names or
manufacturer names for each one so that you do not have to
remember which is connected to which input source.
If you want to enter a name for a preset broadcast radio station, select
the station that you want to name and enter the name.
a. Character Display
Use this setting to select whether or not to display a custom name
when the current input source is selected.
Component video input
Last Valid
Last Valid
b. Character
Last Valid
If you have selected "Yes" for the Character Display above, then
Last Valid
here you can enter the name that you want to display. Press the
INPUT 1
cursor button to clear the current entry. Press the
INPUT 2
bring up the Character Input screen.
INPUT 2
INPUT 2
INPUT 2
INPUT2
Last Valid
Note:
If you are using the front display and not the OSD Menu, press the
button when "Char: " appears in the front display. Then
"ABCDEF.." appears. This is the Character Input screen. The cursor
buttons will allow you to navigate through this screen just as they
would if you were using the OSD Menu so you will need to refer to
the figure below for the actual layout of the Character Input screen.
At the Character Input screen, press the cursor buttons to move the
cursor to the desired character and then press the ENTER button.
The characters entered will appear in order in the 10-character space
field above.

2-4. Character Input Sub-menu

Advanced Menu
2.Input Setup
Input:DVD
2-4.Character Input
Input:DVD
a.Character Display
b.Character
:
Press
Yes: Select to have your custom name displayed.
No: Select to have the default name displayed.
Advanced Menu
2.Input Setup
Input:DVD
2-4.Character Input
Input:DVD
b.Character
:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
|ENTER| 0123456789-.'
()+*/=,:;!?_
Back:
|RETURN|
:No
to edit.
to clear.
Quit:|SETUP|
cursor button to
53