Onkyo TX-NR900E Instruction Manual page 21

Connecting to Audio/Video equipment
8. Settop box, video camera
(VIDEO 3)
S Video output
Video output
L (white)
Analog audio
output R (red)
Digital audio output (optical)
8, 9. Connecting a satellite tuner, television, or settop box
(VIDEO 3 or 4)
Using an RCA video cable, connect the video output jack
(composite) of the device to the VIDEO 3 (or 4) VIDEO IN jack of
the TX-NR900/900E. Or if the device has an S video output jack,
connect it to the VIDEO 3 (or 4) S VIDEO IN jack of the TX-
NR900/900E using an S video cable. Or if the device has component
video outputs, connect them to one of the banks of COMPONENT
VIDEO INPUT jacks on the TX-NR900/900E.
With the initial settings of the TX-NR900/900E, the VIDEO 3
and 4 input sources are set for the COMPONENT VIDEO
INPUT 2 jacks.
If you connect the device to the COMPONENT VIDEO INPUT 1
jacks, this must be changed at Setup Menu → Input Setup → Video
Setup → Component Video (see page 53).
Using an RCA audio cable, connect the audio output jack of the
device to the VIDEO 3 (or 4) AUDIO IN jacks of the TX-NR900/
900E. Make sure that you properly connect the left channel to the L
jack and the right channel to the R jack.
If the device has a digital output, connect it to either the DIGITAL
INPUT COAX jack or DIGITAL INPUT OPT jack of the TX-
NR900/900E depending on the type of connector on the device.
With the initial settings of the TX-NR900/900E, the VIDEO 3 input
source is set for digital input at the OPT 3 jack, and the VIDEO 4
input source is set for digital input at the OPT 4 jack.
If the digital connection is made at a different jack, this must be changed
at Setup Menu → Input Setup → Digital Setup (see page 51).
DIGITAL PRE
AUDIO VIDEO
INPUT NNA
R
COAX FRONT
1
R L
SUB
AM
2
OUT
SURR
3 IN
SURR
R
BACK/
OPT
ZONE 2
FM
1 OUT
75
FRONT
2 IN
IO
R
L
SUB
3 PHONO OUT
SURR
4 CD IN
R
OUT
OPT
1 IN
SURR
BACK
TAPE
2 IN
IN
GND
L R L
IO AUDIO VIDEO
DIGITAL
OUTPUT
10. Connecting video camera, etc. (VIDEO 5 INPUT)
Using an RCA video cable, connect the video output jack
(composite) of the device to the VIDEO 5 VIDEO jack of the TX-
NR900/900E. Or if the device has an S video output jack, connect it
to the VIDEO 5 S VIDEO jack of the TX-NR900/900E using an S
video cable.
Using an RCA audio cable, connect the audio output jack of the
device to the VIDEO 5 AUDIO jacks of the TX-NR900/900E. Make
sure that you properly connect the left channel to the L jack and the
right channel to the R jack.
If the device has an optical digital output, connect it to the VIDEO 5
DIGITAL jack of the TX-NR900/900E.
The VIDEO 5 digital input is fixed to the OPTICAL input on the
front panel.
COMPONENT
S VIDEO
VIDEO
OUTPUT
MONITOR
OUT Y
ZONE 2 P
B
DVD P
R
INPUT 1
Y
VIDEO 1
P
B
P
R
VIDEO 2
INPUT 2
Y
VIDEO 3
P
B
VIDEO 4 P
R
S VIDEO
S Video output
Digital output
(optical)
10. Video camera/ Video game
(VIDEO 5 INPUT)
Video output
L
Analog output
R
: Signal flow
9. Satellite tuner or television
(VIDEO 4)
S Video output
Video output
L (white)
Analog audio
output
R (red)
Digital audio output
(optical)
Front panel
VIDEO 5 INPUT
N
S VIDEO VIDEO L AUDIO R
DIGITAL
21