Navigating Through The Setup Menu - Onkyo TX-NR801 Instruction Manual

Setup Menu —Continued
OSD
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
Front panel
dispaly
µ

Navigating Through the Setup Menu

You can change settings in the Setup Menu using the
buttons on the front panel and on the remote controller.
The buttons on the remote controller correspond to
those on the TX-NR801/TX-NR801E as shown below.
SETUP
TUNING
ENTER
RE TURN
PRESET
DIRECT / PURE AUDIO STEREO SURROUND THX DSP MEMORY FM MODE A-FO RM LISTENING MODE MEMORY
SETUP/ENTER/
RETURN/Cursor
/ / /
Button on remote controller
SETUP
(upper edge of
ENTER button)
(lower edge of
ENTER button)
(left edge of
ENTER button)
(right edge of
ENTER button)
ENTER
RETURN
→Basic Menu
[ENTER]Quit:[SETUP]
Main menu
Button on TX-NR801/
TX-NR801E
SETUP
SETUP
UP
DOWN
LEFT
RIGHT
ENTER
ENTER
RETURN
RETURN
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
[ENTER]Quit:[SETUP]
Menu
1
Press the SETUP button.
The main menu (Advanced Menu or
Basic Menu) appears on your television
monitor.
2
Using the
select the menu that you want to
enter.
3
Press the ENTER button to enter
the selected menu.
The screen for that menu appears.
4
Use the
select the sub-menu that you want
to enter and press the ENTER but-
ton.
Each sub-menu has different settings
that can be changed as desired, and they
are all explained in the pages that follow.
To change a setting, first select it using
the
change the setting using the
cursor buttons.
5
Press the SETUP button to exit the
Setup Menu.
Press the RETURN button to set the new
settings and return to the previous menu.
1-1.Speaker Config
a.Subwoofer :Yes
b.Front L/R :Small
c.Center :Small
d.Surr L/R :Small
e.Surr Back :Small
f.Crossover:80Hz(THX)
Quit:[SETUP]
Sub-menu
and cursor buttons,
and cursor buttons to
and cursor buttons, and then
and
29