Creating Pppoe + Static Ip Or Pppoe + Dynamic Ip Wan Connection - D-Link DIR-300A User Manual

DIR-300A Wireless N150 Router
User Manual

Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection

To create a connection of the PPPoE + Static IP or PPPoE + Dynamic IP type, click the Add button
on the Net / WAN page. On the opened page, select the relevant value from the Connection
Type drop-down list and specify the needed values.
Figure 81. The page for creating a new
Parameter
Interface
Name
Enable
Direction
PPPoE + Static IP
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 96 of 181
Configuring via Web-based Interface
connection. The General settings section.
Description