D-Link DIR-300A User Manual page 118

DIR-300A Wireless N150 Router
User Manual
When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and
WPA Encryption settings sections are available:
Figure 100. The WPA2 value is selected from the Network Authentication drop-down list.
Parameter
WPA2 Pre-
authentication
IP address
Port
RADIUS encryption key
WPA Encryption
WPA renewal
When you have configured the parameters, click the Apply button.
The checkbox activating preliminary authentication (displayed only
for the WPA2 and WPA/WPA2 mixed authentication types).
The IP address of the RADIUS server.
A port of the RADIUS
The password which the router uses for communication with the
RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
An encryption method: TKIP, AES, or TKIP+AES. For the wireless
network operating modes which support 802.11n standard (see the
value of the Wireless mode drop-down list on the Wi-Fi / Basic
settings page), the AES value is only available.
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Page 118 of 181
Configuring via Web-based Interface
Description
server.