D-Link DIR-300A User Manual page 99

DIR-300A Wireless N150 Router
User Manual
Figure 84. The page for creating a new
Parameter
Isolate connection
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
PPPoE + Static IP
Miscellaneous (for IP section)
When the checkbox is selected, the router uses an alternate routing
table for this connection. Select the checkbox only when your ISP
requires this.
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests
from the external network through this connection. For security
reasons, it is recommended not to select this checkbox.
Page 99 of 181
Configuring via Web-based Interface
connection. The Miscellaneous section.
Description