Pppoe + Dynamic Ip Connection - D-Link DIR-300A User Manual

DIR-300A Wireless N150 Router
User Manual

PPPoE + Dynamic IP Connection

If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection
section, page 96).
Click the Next button to continue.
Figure 34. Configuring PPPoE + Dynamic IP WAN connection.
Page 49 of 181
Configuring via Web-based Interface