Creating Pptp + Static Ip Or L2Tp + Static Ip Wan Connection - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Creating PPTP + Static IP or L2TP + Static IP WAN Connection

To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 76. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Interface
Name
Enable
Direction
MTU
General settings
A physical interface to which the new connection will be assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 93 of 169
Configuring via Web-based Interface
Description