Creating Static Ipv6 Or Dynamic Ipv6 Wan Connection - D-Link DIR-300A User Manual

DIR-300A Wireless N150 Router
User Manual

Creating Static IPv6 or Dynamic IPv6 WAN Connection

To create a connection of the Static IPv6 or Dynamic IPv6 type, click the Add button on the Net /
WAN page. On the opened page, select the relevant value from the Connection Type drop-down
list and specify the needed values.
Figure 77. The page for creating a new Static IPv6 connection. The General settings section.
Parameter
Interface
Name
Enable
Direction
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 92 of 181
Configuring via Web-based Interface
Description