D-Link DIR-300A User Manual page 87

DIR-300A Wireless N150 Router
User Manual
Figure 72. The page for creating a new
Parameter
Isolate connection
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
When all needed settings are configured, click the Apply button.
Pv6 PPPoE
Miscellaneous
When the checkbox is selected, the router uses an alternate routing
table for this connection. Select the checkbox only when your ISP
requires this.
Select the checkbox to allow using RIP for this connection.
For the PPPoE Dual Stack type only.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
For the PPPoE Dual Stack type only.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Page 87 of 181
Configuring via Web-based Interface
connection. The Miscellaneous section.
Description