Configuration - D-Link DIR-300A User Manual

DIR-300A Wireless N150 Router
User Manual

Configuration

On the System / Configuration page, you can reboot the device, save the changed settings to the
non-volatile memory, restore the factory defaults, backup the current configuration, or restore the
router's configuration from a previously created file.
The following buttons are available on the page:
Control
Save
Reboot
Factory
Backup
Figure 132. The System / Configuration page.
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the router's parameters.
Otherwise the changes will be lost upon hardware reboot of the
router.
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Back and Bottom Panels section, page 13).
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Page 166 of 181
Configuring via Web-based Interface
Description