D-Link DIR-300A User Manual page 151

DIR-300A Wireless N150 Router
User Manual
You can specify the following parameters:
Parameter
Protocol
Action
Activate
IP version
Figure 121. The page for adding a rule for IP filtering.
General
A protocol for network packet transmission. Select a value from the
drop-down list.
Select an action for the rule.
Allow: Allows packet transmission in accordance with the criteria
specified by the rule.
Deny: Denies packet transmission in accordance with the criteria
specified by the rule.
If the checkbox is selected, the rule is enabled. Deselect the
checkbox to disable the rule.
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Page 151 of 181
Configuring via Web-based Interface
Description