Creating Wan Connection; Pppoe Connection - D-Link DIR-300A User Manual

DIR-300A Wireless N150 Router
User Manual

Creating WAN Connection

PPPoE Connection

In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page
Creating PPPoE WAN Connection section, page 78).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 56).
Figure 25. Configuring PPPoE WAN connection.
(for a detailed description of all the connection's parameters, see the
Page 40 of 181
Configuring via Web-based Interface