Pppoe + Static Ip Connection - D-Link DIR-300A User Manual

DIR-300A Wireless N150 Router
User Manual

PPPoE + Static IP Connection

Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection
section, page 96).
Click the Next button to continue.
Figure 31. Configuring PPPoE + Static IP WAN connection.
Page 46 of 181
Configuring via Web-based Interface