Installing The Hitch; Installing The Batteries - Toro 07287TC Operator's Manual

Step
6

Installing the Hitch

Parts needed for this step:
1 Hitch
Procedure
1. Remove the 4 bolts and nuts from the inside
rear of the frame.
2. Align the hitch with the mounting holes on the
frame. Secure the hitch with the screws and
nuts (Figure 8).
Figure 8
1. Hitch
2. Left pivot bracket
Step
7

Installing the Batteries

Parts needed for this step:
2
Battery hold down
2 Battery hold down rod
7 Battery cables
4
Battery tray pads
1 Battery pad
2
Flange nut (3/8 inch)
1 Battery terminal protector spray
Procedure
Toro recommends the use of either Trojan T105
or T145, or US. Battery US2200 or US145.
Battery Specification: 6V 225AH @ 20hr rate
Dimensions: (LxWxH) (10-1/4 x 7-1/8 x 11-1/4
inches)
1. Turn the key switch to the Off position and
remove the key.
2. Install the battery tray pads into the rear frame
assembly as shown Figure 9.
1. Battery tray pads
2. Rear frame assembly
15
Figure 9