Daily Maintenance Checklist; Premaintenance Procedures; Heavy Duty Operation - Toro 07287TC Operator's Manual

Table of Contents

Advertisement

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check
Item
Check brake and parking
brake operation.
Check gear shift/neutral
operation.
Check unusual operating
noises.
Check tire pressure.
Check uid leaks.
Check instrument
operation.
Check accelerator
operation.
Check ride height and
toe-in.
Lubricate all grease
ttings.
Touch up damaged paint.
If you leave the key in the On/Off switch, someone could accidently start the vehicle and
seriously injure you or other bystanders.
Remove the key from the On/Off switch and disconnect a battery cable before you do any
maintenance.
The bed must be raised to perform some routine maintenance.
A raised bed can fall and injure persons that are underneath it.
• Always use the prop rod to hold the bed up before working under it.
• Remove any load material from the bed before working under it.
Premaintenance
Procedures

Heavy Duty Operation

Important: If the vehicle is subjected to any
of the conditions listed below, maintenance
should be performed twice as frequently:
For the week of:
Mon.
Tues.
Wed.
Thurs.
• Desert operation
• Cold climate operation (below 32 degrees F)
• Trailer towing
• Frequent operation on dusty roads
• Construction work
• After extended operation in mud, sand, water,
or similar dirty conditions, have your brakes
inspected and cleaned as soon as possible. This
30
Fri.
Sat.
Sun.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

07288tcWorkman e2060Workman e2065

Table of Contents